Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Equipping the Bike - what's the best gear?
Equipping the Bike - what's the best gear? Anything to do with the bikes equipment, saddlebags, etc. Questions on repairs and maintenance of the bike itself belong in the Brand Specific Tech Forums.
Photo by Hendi Kaf, in Cambodia

I haven't been everywhere...
but it's on my list!


Photo by Hendi Kaf,
in Cambodia



Like Tree5Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 18 Oct 2008
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
Making your own luggage rack - Any tips?

I've read threads and links before about making your own hard panniers, but nothing on fabricating a rack to hang them off. I'm wondering if anyone has any tips for designing and making one.

I've got the idea that mild steel is best to use as it's easy to weld if it gets broken, and round section tube is better than square. I reckon that bolting things together is better than welding, because it's easier to replace a sheared bolt in the wild than weld up a popped join. I've got access to a pipe bender and a drill press so I'm OK there.

So does anyone have any advice they could give me? Number of hard points on the bike you need to fix to, that kind of thing. Any pictures of existing racks would be great too they seem quite hard to google up.
__________________
Happiness has 125 cc
Reply With Quote
  #2  
Old 18 Oct 2008
Big Yellow Tractor's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2008
Location: England
Posts: 649
Hi Alex,

First thing, does anyone already make a rack for your bike or for a similar model ? If they do, buy it and adapt. It will take you serious time to make a rack; if your time is cheap (or like me you enjoy messing about with bits of tube) then crack on.

If your bike is designed to take a pillion, you have a fairly straightforward job; mountings can be found at the pillion pegs and up at the seat. A lot of bikes have a long seat (so a solo rider can move about) but little or no subframe; these will need more thought.

Have a look at where the forces are acting. If you have mountings up at the back of the seat and down near the swing-arm pivot, the weight on your rack is trying to pull the back of the bike off onto the rear wheel, do you need to strengthen the subframe and/or it's mountings to resist this ?

Be careful not to over-engineer, you can use quite light gauge tube if you design it right.

What boxes / bags are you going to fit ? if you already have them, then spend some time hanging them on the bike to check where best to mount them before you start.

Search the net and look at other bikes for ideas. You will see some comercial stuff that is pretty crappy. Also think about where and how you will ride; off road will really punish your luggage.

Regards

BYT
Reply With Quote
  #3  
Old 18 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Jun 2007
Location: On the road
Posts: 121
Yes steel is the way to go in my book.
I dont think there really is too much difference between round and box section though. I chose box because of the thin wall thickness available, the panniers I made are'nt that big so there wasn't a need for over engineering. Just be carefully that the seam is situated away from the stresses.

You can kill 2birds with the support frame with some brainwork. Triagulating the frame makes the whole bike stronger. This is usually done by fitting a diagonal brace from the front foot peg mount up to the strongest mounting point at the back. It depends on your bike though.

From this you can nut out how to mount your boxes.

The mounting system we have on bike has proved to be strong and secure. I can take the boxes off in under 20seconds as there is only one lock (each side) to close and fit the box to the frame.
This way I can unpack quickly as well as get the bike through doorways with minimal fuss.

Take a look at the bike prep section of our blog.
Any Qs, dont hesitate.
N+A
__________________
Round the world on a Postie bike, 2-up
Bilingual Blog (japanese and English)
http://faster-than-walking.com
Reply With Quote
  #4  
Old 18 Oct 2008
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
Thanks for that advice it's great, I'd thought about taking it down to the pillion pegs (yes it does have a pillion seat). It's also already got a rear (top box) rack, so logically those mountings should help a lot. My main reasons for round tubing are aesthetics and also because my pipe bender only bends round tubes.

Unfortunately no, no-one makes a rack at the moment for pannier boxes, I've searched everywhere. Found a couple of places that would fabricate one, but they're very expensive and also a very, very long way away.
__________________
Happiness has 125 cc
Reply With Quote
  #5  
Old 18 Oct 2008
Caminando's Avatar
Moderated Users
Veteran HUBBer
 
Join Date: Jan 2006
Location: DogZone Country
Posts: 1,218
Thumbs up

Some good comment above. Round tube is actually stronger than square, but square is so much easier to work with. Thats what I used. I bought a cheap little electric welding machine (£50) and welded up a frame. I meant to improve/replace it because it was a rough prototype, but I just keep using it. The square tube has a nice light thin wall, but this makes it tricky to weld.

I took the carrier down to the pillion pegs. I have mounted my carrier to 6 points in total.

I got my machine in Weldom-should be one near you. It has maybe increased in price as I got mine some time ago. It's a Nordikka. I think you can get these machines in Bricodepot too.
Reply With Quote
  #6  
Old 18 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Apr 2006
Location: Staffordshire. uk
Posts: 766
Flat bar can be used as well. If the forces acting on it are across the large flat face. A combination of both will give you the best of both worlds Slim and strong. It needs to hold the weight of the bike because it will fall over!

Here's some pics from the minimilist touring thread on ADV. A nice neat job.



Reply With Quote
  #7  
Old 18 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Posts: 1,598
A trick I learned when using round tube, pinch the end a bit rather than try fabricating and welding an angled join on a joint. Also every one welds in a compressive support from teh footrests. but why not a tensive support from on high at aboutthe rear of the fuel tank to the rear bottom edge.

Caminado.. oddly I have a Nordika I bought here also...Nice to weld now without getting shocks
Reply With Quote
  #8  
Old 18 Oct 2008
DLbiten's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Aug 2007
Location: Camano is. USA
Posts: 440
I looked in to making racks for my bike but went with premade ones. You will want 3 hard mounting points for each side then a bar to "tie" each of the side together at the back lower end, as there is almost no way to secure this area. As seen in the above pics but the rack in the pics look like SS look good but triky to weld. Do NOT use flat bar stock for the the rack suports, the round frame that the luggage is bolted to can be flat as it dose little suporting. But the rack suports, the parts that hold the rack to the bikes subfram need to vary strong and tuff. They flex with every bump and brake in time or they will brake a weld. If you must use flat bar stock fave a few welded up and have another folded over the bar stock and round rack.

Round tube is the way to go if you can if you see this too hard and need to go square tube (or rectangular) your rack will end up being hever for the same strength. A good weld will last longer then a bolt and it hold up better to the vibrations and hits. Bolting the mess together will be ok in town but on bad roads you may well be replacing bolts every few days the hols for the bolts will enlarge to the point where you will to some how have to find a way fix it. (like cutting it out and welding on a new piece.)

One thing I looked in to was getting square tubing that had a ID (inner dimension) gust bigger the the OD (outer dimension) of the rack. A few little chunks of this will help with any quick fix you may need.

Dont over build the rack I have seen some racks that just do not hold the luggage on the bike. There hever than the luggage (and every thing in it)
Reply With Quote
  #9  
Old 18 Oct 2008
Big Yellow Tractor's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2008
Location: England
Posts: 649
Quote:
Originally Posted by DLbiten View Post
One thing I looked in to was getting square tubing that had a ID (inner dimension) gust bigger the the OD (outer dimension) of the rack. A few little chunks of this will help with any quick fix you may need
I had thought of that. Also, if you have a couple of bits of tube that have been cut open lengthways, they would make a good splint with a couple of hose clips.

I started building a my rack but got a bit stuck on the best lower mounting. Couldn't come up with anything I liked so have walked away. Hopefully when I re-start, I'll have a flash of inspiration.

A good tip when joining tube end to side (T-shape) is to put the tube in a drill press and run a holesaw the same diameter as the tube though it. This gives the perfect fit. The same can be achieved with a small angle grinder and a bit of fiddling. Another way is to crush the last inch of tube in a vice. If you slip a bit of flat up inside so it doesn't crumple, you get a neat fit.
Reply With Quote
  #10  
Old 18 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: May 2006
Location: Bribie Island Australia
Posts: 678
With a tube bender you can get away with having far fewer welds - they are the weak spots. Dont butt weld, if you must have a butt weld of a piece of flat to round, put the round through the flat, weld both sides and grind off. If you use tube then dont weld on the bends. Put a brace behind each bend greater than 45 degrees. Anneal all the bends and welds - having "hard" welds and "soft" tube is where the frame fails. Ideally then harden the whole thing using heat and quenching in old engine oil.

If you are a crap welder like me, then use round bar so that you cant blow through as with tube.

See if you can find some pics of the Krauser carriers for BMWs circa 1980, or the BMW frames from the mid 1980s.
Reply With Quote
  #11  
Old 19 Oct 2008
Registered Users
HUBB regular
 
Join Date: Nov 2007
Location: Western, Kentucky
Posts: 56
Here is a picture of one I built for my DL650, I built it a little heavy due to using Ammo cans. My battery is about to run down, I'll add some more pics later.

Reply With Quote
  #12  
Old 19 Oct 2008
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
Some great tips there thanks, I'm definately going for round tubing myself, like I said I can bend tubing no bother, but welding? That's a different story, I can count my successful welding exploits on one finger. Fortunately I know a man who can.

So far it looks like:
  • Round tubing is stronger than square for the sae weight.
  • Welds are better than bolts.
  • Flat bar can be used for the frame, but not for the frame to bike attachments.
  • Pinching round tubing flat is fine.
  • Attach it to 3 points per side minimum.
  • Add a "crossbar" between them at the back.
So, next step for me, work out what luggage I'm going to use so I can see the fixings, and then I'm going to make a tester out of PVC tubing, to get the fit etc, I often do this, built a bicycle frme out of it once to see how it looked. That should help me line things up, and I can use carboard boxes as "panniers to check clearnace etc and then onto steel.

So, the inevitable question after, what about surface finishes to stop the rust setting in?
__________________
Happiness has 125 cc
Reply With Quote
  #13  
Old 19 Oct 2008
Registered Users
Veteran HUBBer
 
Join Date: Jun 2008
Posts: 236
hey alex, what heppened to the panniers and racks that come with the derbi terra adventurer? i have been trying to get some for some time to adapt. are they not making them anymore? also if you are planning on welding you can get these which make the job a piece of p*ss

Magnet Products | Purchase and commission bespoke magnet products
Reply With Quote
  #14  
Old 19 Oct 2008
Alexlebrit's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Mar 2006
Location: West London
Posts: 920
Well I've got mine, and they're great, but it appears that it was one batch and they've now stopped having them (think they fell out with their suppliers). But I was asking for a friend actually who's just got themselves a Derbi Senda Baja something or other, and of course there's not a rack in site for them.
__________________
Happiness has 125 cc
Reply With Quote
  #15  
Old 19 Oct 2008
Big Yellow Tractor's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jan 2008
Location: England
Posts: 649
Quote:
Originally Posted by tommysmithfromleeds View Post
hey alex, what heppened to the panniers and racks that come with the derbi terra adventurer? i have been trying to get some for some time to adapt. are they not making them anymore? also if you are planning on welding you can get these which make the job a piece of p*ss

Magnet Products | Purchase and commission bespoke magnet products
Don't be afraid to tack on a temporary brace here & there to hold things true. Just make sure your tack is somewhere that's easy to get to with grinder.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Luggage Rack BuzzBum Yamaha Tech 3 4 Oct 2008 00:58
H&B Luggage Rack IanW KTM Tech 1 8 Nov 2003 18:43
Luggage Rack XR 600 XR Max 600 Equipping the Bike - what's the best gear? 2 20 Feb 2003 23:49
luggage rack Kurt Ellul Honda Tech 1 22 Jan 2003 04:15
luggage rack Kurt Ellul Equipping the Bike - what's the best gear? 1 22 Jan 2003 00:44

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

25 years of HU Events
Be sure to join us for this huge milestone!

ALL Dates subject to change.

2025 Confirmed Events:

Virginia: April 24-27
Queensland is back! May 2-5
Ecuador June 13-15
Germany Summer: May 29-June 1
CanWest: July 10-13
Switzerland: Date TBC
Ecuador: Date TBC
Romania: Date TBC
Austria: Sept. 11-14
California: September 18-21
France: September 19-21
Germany Autumn: Oct 30-Nov 2

Add yourself to the Updates List for each event!

Questions about an event? Ask here

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

Adventurous Bikers – We've got all your Hygiene & Protection needs SORTED! Powdered Hair & Body Wash, Moisturising Cream Insect Repellent, and Moisturising Cream Sunscreen SPF50. ESSENTIAL | CONVENIENT | FUNCTIONAL.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 10:39.